background image

Unpacking and Inspection:

These 

B23 

loudspeakers 

are 

packaged 

extremely  well  to  ensure  no  damage  occurs 

during shipping.   Carefully open the box and 

remove  the  speaker.    Inspect  it 

immediately for any kind of damage.  

The  speaker  should  have  left  our 

warehouse  in  perfect  condition,  so 

any damage must be reported to your 

dealer  or  to  TruAudio  right  away.  

Please  contact  us  immediately  at 

1.888.858.1555 

All service to this product MUST be 

done by a TruAudio authorized repair center.  

If  you  try  to  do  any  kind  of  repair,  this 

will void the warranty!

We recommend that you retain the packaging in 

case  a  need  arises  for  you  to 

transport your loudspeakers.   

Home Theater Use: 

Today’s 

Home 

Theater 

systems 

require  six  or  more  speakers  for 

true, 

life 

like 

Home 

Cinema 

listening.  These speakers are: the 

front  right  and  left,  the  center 

channel, 

the 

right 

and 

left 

surround  (rear),  and  a  subwoofer.    Some 

systems  also  require  additional  surround 

speakers  or  rear  centers  to  enhance  the 

theater  sound.      The  placement  for  these 

speakers  is  critical  to  having  your  home 

theater experience the best it can be.  

Before Installation:

In  order  for  these  speakers  to 

perform  to  their  potential,  we 

recommend  that  the  amplifier  or 

receiver 

must 

have 

the 

proper 

amount  of  power  output.    For  the 

B23-465    we  suggest  using  5-350 

watts and for the B23-265 & 265SURwe 

suggest using 5 to 220 watts.  

These speakers require two conductor speaker 

cable 

when 

connecting 

to 

the 

amplifier/receiver.    For  most  applications, 

we suggest using a good quality, high strand 

14 gauge.  For longer runs over 75 feet, we 

suggest using a 12 gauge speaker cable.  

If the speaker cable will be run inside the 

wall  or  ceiling,  make  sure  the 

speaker cable is UL certified and is 

in  accordance  with  all  your  local 

building regulations.  

Determining Speaker Placement:

When  properly  installed  and  with 

appropriate equipment, the TruAudio 

B23 

series 

will 

provide 

an 

unforgettable experience.  B23 speakers are 

capable  of  delivering  precise  imaging  and 

unmatched  sound  quality.    To  maximize  the 

performance of your system, please take time 

to  read  instructions  for  proper  setup  and 

installation.

Pre-installation  is  critical  to 

achieving  the  maximum  performance 

from  your  TruAudio  B23  speakers.  

Factors  such  as  the  location  and 

height  of  seating  and  location  of 

the  video  monitor  will  dictate  the 

proper placement of speakers.

  

Remember that the wall is part of the sound 

reproduction  system.    The  listening  room 

should be symmetrical both in overall shape, 

and  with  respect  to  furnishing.    The  best 

listening  rooms  exhibit  low  intrusion  of 

ambient  noise.  The  Bad  Boys  should  not  be 

mounted with less than two feet of 

unobstructed wall on either side.

Optimum  horizontal  placement  of 

left  and  right  speakers  is  six  to 

ten feet apart and at least 18” from 

the side walls.  See figure

_

#1

Preparation before Speaker 

Installation

Use  the  back  side  of  the  backbox  or  the 

cutout  template  and  mark  on  the  wall  where 

you would like to install your speaker, cut 

the drywall out.  See figure

_

#2

Fig #2

Fig #3

Slightly behind

ear center

An alternate 

position may 

be in the rear 

walls spaced 

identical with 

the front, left, 

and right 

speakers.

Fig #1

Summary of Contents for B23 series

Page 1: ...cone breakup which is a form of distortion that occurs at lower frequencies in larger cones The woven carbon fiber cone material was chosen because it is very stiff limiting cone breakup in the usable band It is also very light which helps reduce the weight of the moving assembly By balancing these qualities a midrange speaker was produced with good dispersion in the usable band with very little b...

Page 2: ... we suggest using a good quality high strand 14 gauge For longer runs over 75 feet we suggest using a 12 gauge speaker cable If the speaker cable will be run inside the wall or ceiling make sure the speaker cable is UL certified and is in accordance with all your local building regulations Determining Speaker Placement When properly installed and with appropriate equipment the TruAudio B23 series ...

Page 3: ... DO NOT remove the plastic covering over the aluminum face of the speaker until the speaker is full installed If there is any damage contact TruAudio immediately 888 858 1555 Connect the twisted speaker cable that is inside the backbox to the speaker terminals on the back of the speaker Push down each post and insert the speaker cable The posts will be located on the back of the speaker on the cro...

Page 4: ... 90 dB Cloth MDF 25 1 4 642MM H 24 1 4 616MM H Single Piece Carbon Fiber Diaphragm 12 7 16 316MM W 13 7 16 342MM W 4 3 16 106MM D B23 265LCR In Wall 2 Way Dual 6 5 Coated NA 1 Titanium 220 Watts 4 Ohms 45 20kHz 91 dB Cloth MDF 25 1 4 642MM H 24 1 4 616MM H Single Piece Carbon Fiber Diaphragm Swivel 12 7 16 316MM W 13 7 16 342MM W 4 3 16 106MM D All in ceiling in wall in room speakers and volume co...

Reviews: