This chamber can be used right out-of-package and then cleaned weekly.
1
Remove the backpiece (
D
). To detach the frontpiece (
B
), twist chamber as shown.
2
Soak the parts for 15 minutes in a mild solution of liquid dish detergent and lukewarm clean water.
Agitate gently. Rinse parts in clean water.
OR
Place parts in top rack of dishwasher. Ensure product
is securely placed face up. Run the dishwasher on a normal or light cycle and avoid heated dry.
3
Shake out excess water and allow to air dry in a vertical position. Ensure parts are dry before
reassembly.
4
To reassemble, fit the frontpiece on the end of the chamber and twist firmly until securely locked
into position. Center the alignment feature (
C
) on the backpiece with the
Flow-Vu
* Inhalation
Indicator (
A
), as shown. Press firmly to attach the backpiece.
CLEANING INSTRUCTIONS
A
Flow-Vu
*
Inhalation Indicator
B
Frontpiece
C
Alignment Feature
D
Backpiece
D
B
Notes
• Do not boil or sterilize.
• Product should be replaced after 12 months of use.
• This product contains no latex.
• Do not share this medical device.
• If you notice medication build-up in your chamber, wash the inside of the chamber gently with a soft cloth.
• Dishwashing with overly dirty dishes is not recommended.
• If cleaning in a dishwasher use a rinse aid.
Cautions
• Do not leave the chamber unattended with children. This is not a toy.
• Product may be permanently damaged if boiled, sterilized or cleaned in a dishwasher at a temperature
above 70°C.
For optimum performance you should replace
your chamber every 12 months.
C
3
4
2
1
