CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS (continued):
Step 1: Secure Left Pedal Link:
a
)
Important:
With machine still on
pallet, attach left pedal linkage to
crankshaft as shown.
b
) Secure with four M8 bolts using 6mm
hex key. Use ball end of hex key for
bottom screw.
c
) Once linkage is attached,
carefully
remove unit from pallet.
Hardware Required:
4 M8 x 1.25 x 12 Bolts
Step 2: Attach Upper Body Exercise Arms:
a)
Note upper arms are labeled “L” for
Left and “R” for Right.
b)
Install each upper arm with two M12
bolts using a 10 mm hex key.
Hardware Required:
4 M12 x 1.75 x 25 Bolts
Truefitness.com / 800.426.6570 / 636.272.7100
9
Summary of Contents for CS200
Page 1: ... Assembly Guide Warranty Card Included Revision 061317 CS200 ELLIPTICAL OWNER S MANUAL ...
Page 9: ...CHAPTER 1 SAFETY INSTRUCTIONS Truefitness com 800 426 6570 636 272 7100 5 ...
Page 11: ...Truefitness com 800 426 6570 636 272 7100 7 ...
Page 14: ...Truefitness com 800 426 6570 636 272 7100 10 4 M5 x 0 8 x 16 Screws ...