Truefitness.com / 800.426.6570 / 636.272.7100
6
Safety Key (E-Stop) Engaged:
Shown to the left is the disengaged position of the safety
key (e-stop).
When the equipment is in use or the user is standing on
the belt not in use, the safety key clip must be attached to
the user's clothing. This allows the safety stop to be
engaged if the safety clip attached to the user pulls the
safety key pull cord taught, thus immediately halting all
treadmill belt activity.
Note: The safety key pull cord length allows free range of
motion for the user within the normal workout
parameters identified within this owner's manual.
Shown to the left is the engaged position of the safety key
(e-stop). Note the safety stop outer sleeve that covers the
safety stop to denote the engaged position.
When the safety stop is engaged, all treadmill belt activity
will cease and the following error message will appear on
the console advising the safety stop is engaged "INSERT
SAFETY KEY."
To remove the console error message and place the safety
stop back in the disengaged position, push the safety stop
reset button in once.
Note: You will be taken to the workout conclusion screen
once the safety stop is switched back to the disengaged
position.
Safety Key (E-Stop) Usage:
Safety Key (E-Stop) Disengaged:
CHAPTER 1: SAFETY INSTRUCTIONS
