Truefitness.com / 800.426.6570 / 636.272.7100
19
CHAPTER 2: ASSEMBLY INSTRUCTIONS
TREADMILL ASSEMBLY STEPS (continued):
Step 7 Lower Console Rack Cover:
a
) Position the rear edge with the long
screw bosses slightly up inside the
console rack first. Next, carefully raise up
the front edge while making adjustments
so the safety clip docking bracket and
long screw boss passes up through the
safety key mechanism.
Warning: Do not force the installation of
the bottom cover.
Hardware Required:
9 bolt
s
M4 x 12
Step 8 Shoulder Trim Assembly:
a) Secure the left and right shoulder
trim assemblies to the console rack
using 14 bolts M4 x 12.
Hardware Required:
14 bolt
s
M4 x 12
