IMPORTANT SAFETY INSTRUCTIONS
Basic Guidelines for Setting up the Treadmill:
After removing the treadmill from the packaging, place your treadmill on a clean, level surface. Make sure the electrical cord easily
reaches a grounded three-pronged outlet and has enough slack to allow the deck to incline without tightening the cord. Do not
allow the treadmill assembly to rest on the cord.
Important Electrical Requirements – 115V
:
Your TRUE treadmill requires a dedicated 115 to 120 volt, alternating current (AC), 15 amp grounded outlet circuit. This means
nothing else can be plugged into the same circuit. Most power circuits are rated for this 115 to 120V AC 15 amp requirement
.
Y
ou must ensure the treadmill does not share the circuit with anything else.
DANGER:
Do not use an extension cord or ungrounded outlet:
The ground helps prevent electrical damage to your treadmill and enhances your safety by helping prevent shock. Check with a
qualified electrician or serviceman if you are in doubt as to whether the treadmill is properly grounded. Do not modify the plug
provided with the treadmill if it will not fit the outlet. Have a proper outlet installed by a qualified electrician.
CHAPTER 2: ASSEMBLY GUIDE
Truefitness.com / 800.426.6570 / 636.272.7100