CHAPTER 2: ASSEMBLY GUIDE
Truefitness.com / 800.426.6570 / 636.272.7100
14 of 36
ASSEMBLY STEPS:
Measure Doorways:
Measure all doorways, hallways and stairwells to make sure that the 34.5” frame can fit through them. If it will not fit,
move all parts to the final location and assemble machine in that location.
If the machine needs to be placed on its
side
, separate the upper pedestal from the base and keep the left side foam packaging attached to the base to help avoid
damaging the plastic covers as shown.
a)
Disconnect the cables from the lower
board.
b)
Separate the Network cable and
COAX cable at the base of the right
pedestal.
c)
Disconnect the Ground cable on the
right pedestal hinge.
d)
Remove the shoulder bolts on each
pedestal hinge and carefully remove the
pedestal from the elliptical base.
NOTE: The elliptical base can be set
on its
LEFT
side, but
ONLY
with the
attached foam packaging underneath it.
Lower Board
Ground Cable
Coax Cable
Network Cable
Shoulder Bolts
Summary of Contents for SPECTRUM ELLIPTICAL XS1000
Page 10: ...Truefitness com 800 426 6570 636 272 7100 10 of 36 CHAPTER 1 SAFETY INSTRUCTIONS...
Page 23: ...CHAPTER 2 ASSEMBLY GUIDE Truefitness com 800 426 6570 636 272 7100 23 of 36 WIRING DIAGRAM...
Page 24: ...CHAPTER 2 ASSEMBLY GUIDE Truefitness com 800 426 6570 636 272 7100 24 of 36 EXPLODED DIAGRAM...
