background image

TEC_TM_121 | REV. A | EN

03/3/2021 

Page 1 of 22

TRADITIONAL REACH-INS

INSTALLATION MANUAL

Congratulations!

You have just purchased the finest commercial refrigerator 

available. You can expect many years of trouble-free operation.

Table of Contents

Safety Information

Safety Precautions & Proper Disposal ......................................................3

Installation

Prior to Installation, Ownership .................................................................4
Wiring Instruction Advisement & Wire Gauge Chart .........................5
Uncrating ............................................................................................................6
Locating, Leveling Legs, and Castors .......................................................7
Leveling & Sealing Cabinet to the Floor .................................................8
Electrical Installation & Safety ....................................................................9

Cabinet Setup

Standard Accessories ..................................................................................10

Cabinet Operation

Startup, Temperature Control & Light Switch Location .................11
Flex Control ....................................................................................................12
General Sequence of Operation .............................................................13

Maintenance, Care & Cleaning

Cleaning the Condenser Coil ...................................................................14
Stainless Steel Equipment Care & Cleaning .......................................16

Cabinet Adjustments, Servicing & Component Replacement

Servicing & Replacing Components......................................................17
Slide Door Operation & Adjustment .....................................................17

Warranty

Warranty (US & Canada Only) ..................................................................21

 TRUE 

MANUFACTURING CO., INC.

T-49-HC

TSD-69

North America – Canada  

and Caribbean

Warranty Phone: +1 855 878 9277

Warranty Fax: +1 636 980 8510

Technical Phone: +1 855 372 1368

Warranty Email: 

 warrantyinquiries@truemfg.com

Technical Email:

 service@truemfg.com

7:00 – 7:00 CST Monday – Thursday.

7:00 – 6:00 Friday. 8:00 – 12:00 Saturday.

Mexico

Phone: +52 555 804 6343/44

Toll Free in Mexico: 01 800 202 0687

service-mexicocity@truemfg.com

9:00 am – 5:30 pm M–F

Latin America

Phone: +56 232 13 3600

servicelatam@truemfg.com

9:00 am – 5:30 pm M–F

UK, Ireland, Middle East, 

Africa and India

Phone: +44 (0) 800 783 2049

service-emea@truemfg.com

8:30 am – 5:00 pm M–F

European Union and 

Commonwealth of 

Independent States

Phone: +49 (0) 7622 6883 0

service-emea@truemfg.com

8:00 am – 5:00 pm M–F

Australia

Phone: +61 2 9618 9999

service-aus@truemfg.com

8:30 am – 5:00 pm M–F

*975523*

INSTALLATION MANUAL

TRADITIONAL REACH-INS

Original Instructions

TRUE MANUFACTURING CO., INC.

2001 East Terra Lane • O’Fallon, Missouri 63366-4434
(636)-240-2400 • FAX (636)-272-2408 • International FAX (636)272-7546 • (800)-325-6152
Parts Department (800)-424- TRUE • Parts Department FAX# (636)-272-9471

T-23-HC

Summary of Contents for TCGG Series























Reviews: