STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevtion
Right
Plan
3D
PLAN VIEW
KCL
TCM-84 TFD040E
TFD040S
TFD040P
TFD0403
TCM Series:
Horizontal Slide Top Merchandiser
TCM-84
DESIGN
• True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures, and
lower utility costs in a convenient spot
merchandiser for beverages.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free)
134A refrigerant.
• Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser; maintains
cabinet temperatures of 33°F to 38°F
(.5°C to 3.3°C).
• Sealed, cast iron, self-lubricating
evaporator fan motor and larger fan
blades give True merchandisers a more
effi cient, low velocity, high volume
airfl ow design. This unique design
insures faster temperature pull down
of warm product, colder holding
temperatures and faster recovery in
high use situations.
• Condensing unit accessed from
rear of cabinet, slides out for easy
maintenance.
CABINET CONSTRUCTION
• Exterior - non-peel or chip black
laminated vinyl; durable and
permanent.
• Interior - attractive, NSF approved,
white aluminum liner with 300 series
stainless steel fl oor.
• Insulation - entire cabinet structure
is foamed-in-place using high density,
CFC free, polyurethane insulation.
• Cabinet fi tted with leg levelers.
GLASS SLIDE LIDS
• “Low-E”, double pane thermal glass
lid assemblies with mitered plastic
channel frames. The latest in energy
effi cient technology.
• Each lid fi tted with 3" (77 mm)
handle.
SHELVING
• Five (5) heavy duty, 10 mil thick pure
grade PVC coated adjustable bin
dividers to maximize storage (1 divider
of a different size than other dividers).
• Floor rack standard to prevent product
from blocking optimal air fl ow.
LIGHTING
• Fluorescent interior lighting, safety
shielded.
• Cabinet lighting utilizes electronic
ballast and T-8 bulbs for brighter
illumination, longer bulb life and
increased energy effi ciency.
MODEL FEATURES
• Evaporator is epoxy coated to
eliminate the potential of corrosion.
• Convenient clean-out drain built in
cabinet fl oor.
• Listed under NSF-7 for the storage
and/or display of packaged or bottled
product.
ELECTRICAL
• Unit completely pre-wired at factory
and ready for fi nal connection to a
115/60/1 phase - 15 amp dedicated
outlet. Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒
230 - 240V / 50 Hz.
❒
White exterior with black trim.
❒
Black interior.
❒
1
1
/
2
" (39 mm) diameter castors.
❒
2
1
/
2
" (64 mm) diameter castors.
❒
4" (102 mm) diameter castors.
❒
Remote cabinets (condensing unit
supplied by others; system comes
standard with 404A expansion valve
and requires R404A refrigerant).
Consult factory technical service
department for BTU information.
115/60/1
NEMA-5-15R
ELEVATION
40"
(1016 mm)
PLAN VIEW
36
9
/
16
"
(929 mm)
14
3
/
8
"
(366 mm)
RIGHT VIEW
18"
(458 mm)
1"
(26mm)
19"
(483 mm)
38"
(966 mm)
37
1
/
2
"
(807 mm)
1
/
2
"
(13 mm)
34
29
/
32
"
(887 mm)
35
13
/
32
"
(900 mm)
