STANDARD FEATURES
Model:
PLAN VIEW
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation
Right Plan 3D
Back
KCL
TDBD-48-2
DESIGN
• True’s commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, and lower utility costs in an
attractive display case that brilliantly displays
deli meats and cheese.
REFRIGERATION SYSTEM
• Factory engineered, self-contained, capillary
tube system using environmentally friendly
(CFC free) 134A refrigerant.
• Gravity coil refrigeration systems provide
high humidity environment for exceptional
preservation of meats and deli products.
Cabinet comes standard with two coils, one in
the upper display area and one in the lower
storage area.
• Extra large evaporator coil balanced with
higher horsepower compressor and large
condenser; maintains cabinet temperatures of
38°F to 40°F (3.3°C to 4.4°C).
• Automatic defrost system; time-initiated, time-
terminated.
• Condensing unit located behind grill in back
of unit. Entire system slides out for easy
cleaning and maintenance.
CABINET CONSTRUCTION
• Exterior - stainless steel front, sides and back.
White laminated vinyl rear panel and rear
louvered grill.
• “Low-E”, double pane thermal front viewing
glass provides maximum insulation value for
greater effi ciency and energy savings.
• Front viewing glass slanted 12.59° to minimize
refl ection from overhead lighting, enhancing
your cold product presentations.
• Stainless steel counter top provides surface
for equipment such as registers and point-of-
purchase novelties.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless steel fl oor
with coved corners.
• Insulation - entire cabinet structure is
foamed-in-place using high density, CFC free,
polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fi tted with leg levelers.
GLASS DISPLAY AREA DOORS
• Glass door assemblies feature “Low-E”, double
pane thermal glass. The latest in energy
effi cient technology.
• Each door fi tted with 12" (305 mm) long
handle.
• Positive seal, self-closing doors. Sliding doors
ride on stainless steel V-Channel with stainless
steel bearings for smooth, even, positive
closure. Doors fi t within plastic channel
frame.
SOLID STORAGE AREA DOORS
• Rear storage access doors are 300 series
stainless exterior inserts with mitered plastic
channel frames. Door liner is white aluminum
to match cabinet interior. Doors are fully
insulated.
• Each door fi tted with 2
3
/
4
" (70 mm) long
handle.
• Positive seal, self-closing doors.
SHELVING
• One (1) adjustable stainless steel mezzanine
shelf 43
9
/
16
"L x 12"D (1107 mm x 305 mm).
Four (4) chrome plated shelf clips included.
• Two (2) non-adjustable heavy duty PVC coated
wire shelves 21
5
/
8
"L x 28
3
/
8
"D (550 mm x
721 mm) create bottom level of display area.
• Aluminum shelf support pilasters. Shelves are
adjustable on
1
/
2
" (13 mm) increments.
LIGHTING
• Case is equipped with three (3) light sources
for maximum product display; two (2)
cabinet mounted and one (1) shelf mounted.
Fluorescent lamps are low UV emitting to
enhance product appearance and increase
shelf life.
• Cabinet lighting utilizes electronic ballast and
T-8 bulbs for brighter illumination, longer bulb
life and increased energy effi ciency. Lamps
are safety shielded.
MODEL FEATURES
• Evaporators are epoxy coated to eliminate the
potential of corrosion.
• Rear mounted exterior 4 amp 115V receptacle.
• Refrigerated lower storage area accessed from
rear of cabinet.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for fi nal connection to a 115/60/1 phase
- 20 amp dedicated outlet. Cord and plug set
included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒
6" (153 mm) standard legs.
❒
6" (153 mm) seismic/fl anged legs.
❒
2
1
/
2
" (64 mm) diameter castors.
❒
4" (102 mm) diameter castors.
❒
Ratchet lock.
❒
11
3
/
4
" (299 mm) deep non-lighted stainless
mezzanine shelves (maximum 2 levels per
unit).
❒
Remote cabinets (condensing unit supplied
by others; system comes standard with
404A expansion valve and requires R404A
refrigerant), consult factory technical service
department for BTU information.
BACK VIEW
115/60/1
NEMA-5-20R
Display Case:
Double Duty Deli Case
53
9
/
16
"
(1361 mm)
48
1
/
16
"
(1221 mm)
3
/
16
"
(5 mm)
1
1
/
4
"
(32 mm)
55"
(1397 mm)
22
1
/
2
"
(572 mm)
19
5
/
16
"
(491 mm)
RIGHT VIEW
35
1
/
16
"
(891 mm)
21
1
/
16
"
(535 mm)
30
1
/
16
"
(764 mm)
13
/
32
"
(11 mm)
1
1
/
8
"
(29 mm)
13
/
16
"
(21 mm)
31
1
/
2
"
(801 mm)
TDBD-48-2 TFSY10E
TFSY10S TFSY10P
TFSY103
TFSY10B
