8
8
True Food Service Equipment, Inc.
............ www.truemfg.com ............
INSTALLATION / OPERATION INSTRUCTIONS
PIZZA PREP TABLES
A.
Remove rear grill and thread electric cord through
grommet in grill.
B.
Replace grill.
C.
Align cutting board with Rivnuts and attach retainer
clip to table top (figure 1).
D.
Install the lid brackets. Note that there is a
specifically designed left, center (if applicable), and
right bracket.
CUTTING BOARD
RETAINER
CLIP
TABLE TOP
Figure 1.
ANCHORING THE TSSU HOOD COVER
TSSU Hood Installation Instruction
Assembly
1.
Locate the lid, (packaged within the cardboard
container on top of the salad sandwich unit), and
position under the hood.
2.
Insert lid into hood while flexing the ends inward.
Make sure lid handle is facing out of the hood. (See
image 1).
3.
Let the ends of the lid flex back into position. Hinge
pins located in the hood slide into sides of the lid
hinge pin holes. (See image 2).
1
2
Hood
Lid
Hinge Pin
Hinge Pin Hole