STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor (U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation
Right
Plan
3D
PLAN VIEW
KCL
DESIGN
• True’s pass-thru heated cabinets are designed
with enduring quality that protects your long
term investment.
HEATER SYSTEM
• Cabinet is designed to provide holding
temperatures of 80°F to 180°F (26.6°C to
82.2°C). Heating system controlled by
exterior on/off switch and temperature
control dial.
• Two (2) stainless steel (for corrosion
resistance), fi nned tube heating elements
(1000 watts each) for uniform generation of
electric heat. Cabinet comes with a total of
2000 watts.
• Equipped with low-velocity fans to assure
even temperature distribution throughout
the cabinet. Fans are controlled by exterior
on/off switch.
• Manually controlled vent located on top of
the cabinet for positive humidity control.
• 12" x 20" (305 mm x 508 mm) pan for water
included, if additional humidity required.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel rear door
and rainshield. Anodized quality aluminum
sides, back and bottom.
• Interior - NSF approved anodized aluminum
side walls and back liner. 300 series stainless
fl oor with coved corners.
• Insulation - entire cabinet structure and rear
solid door are foamed-in-place using high
density, CFC free, polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fi tted with 6" (153 mm) stainless
steel legs.
DOORS
• Front door is energy effi cient, triple pane,
thermal insulated glass.
• Rear door is 300 series stainless steel exterior
and liner.
• Doors open within cabinet dimension.
• Door locks standard.
• Front glass door fi tted with 15" (381 mm)
long extruded aluminum handle.
• Rear solid door fi tted with 12" (305 mm)
long, lifetime guaranteed, recessed handle
that is foamed-in-place with a sheet metal
interlock to ensure permanent attachment.
• Positive seal self-closing doors with 120° stay
open feature. Lifetime guaranteed door
hinges.
• Magnetic door gaskets of one piece
construction, removable without tools for
ease of cleaning.
SHELVING
• Three (3) chrome shelves 25"L x 27
3
/
4
"D
(635 mm x 705 mm) with shelf clips and wall
mounted pilasters (factory installed). 1
1
/
16
"
(27 mm) standoff ensures optimum airfl ow.
• Aluminum shelf support pilasters. Shelves are
adjustable on
1
/
2
" (13 mm) increments.
• Three (3) different interior kits available (see
Kit Options)(upcharge applies). Pilasters and
tray slides require fi eld installation.
LIGHTING
• Incandescent interior lighting - lights
activated by exterior on/off switch, safety
shielded.
MODEL FEATURES
• Exterior, color coded, dial thermometer;
accurate direct reading of internal cabinet
temperature.
• Designed to hold warm baked or cooked
food. Cabinet is not designed to heat
ambient or cold product.
• NSF-4 compliant for open food product.
ELECTRICAL
• True requires a sole use circuit be dedicated
for the unit.
• Unit completely pre-wired at factory and
ready for fi nal connection to a 115/208-
240/60 Hz. single phase, 20 amp dedicated
outlet. Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒
Seismic/fl anged legs.
❒
4" (102 mm) diameter stem castors.
❒
Stainless steel rail skirt for use with legs (fi eld
installed).
❒
Additional shelves.
❒
Stainless steel (electro polished) shelves.
❒
Metal solid door handle (factory installed).
❒
Electronic temperature control (factory
installed).
❒
Curb mountable units.
KIT OPTIONS
Upcharge applies. Lead times may apply.
❒
Kit #1: Nine (9) sets of #1 type tray slides and
pilasters (fi eld installed), bottom support of
one (1) 18"L x 26"D (458 mm x 661 mm) pan
or two (2) 14"L x 18"D (356 mm x 458 mm)
pans.
❒
Kit #2: One (1) set half-section #2 steel rod
tray slides and pilasters (fi eld installed), rim
support of one (1) 18"L x 26"D (458 mm x
661 mm) pan.
❒
Kit #3: Six (6) sets of universal type tray slides
and pilasters (fi eld installed), bottom support
of one (1) 18"L x 26"D (458 mm x 661 mm)
pan, two (2) 14"L x 18"D (356 mm x 458 mm)
pans or two (2) 12"L x 20"D (305 mm x 508
mm) pans.
❒
Additional kit option components available
individually.
TG1HPT-1G-1S
TG1HPT-1G-1S
115/208-240/1
NEMA-14-20R
TG Specifi cation Series:
Pass-Thru Glass Front / Solid Rear Door Heated Cabinet
PLAN VIEW
ELEVATION
77"
(1956 mm)
85
1
/
4
"
(2166 mm)
6
1
/
16
"
(154 mm)
78
3
/
16
"
(1986 mm)
1
3
/
16
"
(31 mm)
1"
(26 mm)
29"
(737 mm)
37
1
/
4
"
(947 mm)
26
11
/
16
"
(678 mm)
90
21
/
32
"
(2303 mm)
38
25
/
32
"
(986 mm)
1
17
/
32
"
(39 mm)
38
9
/
32
"
(973 mm)
26
23
/
32
"
(679 mm)
