STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor (U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
KCL
Model
Front
Side
Plan
3D
PLAN VIEW
TG1HRT-1S-1S
TFQY82E
TFQX61S
TFQX61P
TFQY843
TG1HRT-1S-1S
FRONT VIEW
TOP VIEW
115/208-240/1
NEMA-14-20R
83
3
/
4
"
(2128 mm)
DESIGN
• True’s solid door roll-thru heated
cabinets are designed with enduring
quality that protects your long term
investment.
HEATER SYSTEM
• Cabinet is designed to provide holding
temperatures of 80˚F to 180˚F (26.67˚C to
82.22˚C). Heating system controlled by
exterior on/off switch and temperature
control dial.
• (2) stainless steel, finned tube heating
elements (1000 watts each) per section
for uniform generation of electric heat.
Cabinet comes with a total of 2000
watts.
• Cabinet equipped with low-velocity fan
to assure even temperature distribution
throughout the cabinet. Fans are
controllable by exterior on/off switch.
• Manually controlled vent located on
top of the cabinet for positive humidity
control.
• Exterior dial thermometer; accurate
direct reading of internal cabinet
temperature.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel doors,
front, back, and bottom. Anodized
quality aluminum sides.
• Interior- anodized aluminum liner. 300
series stainless steel floor with coved
corners.
• Stainless steel breaker caps.
• Insulation - entire cabinet structure
and solid door is foamed-in-place using
high density, CFC free, polyurethane
insulation.
• (1) heavy gauge stainless steel ramp
standard per door.
• Designed to accept roll-in racks (inboard
castors) with a maximum dimensions of
27"L x 29"D x 66"H
(686 mm x 737 mm x 1677 mm).
DOORS
• 300 series stainless steel door liner. Doors
open within cabinet dimension. Door
locks standard.
• (3) lifetime guaranteed, cam-lift hinges
per door. Full 180 degree open capability
with a stay open feature at 120 degrees.
• Lifetime guaranteed recessed door
handles. Each door fitted with 12"
(305 mm) long recessed handle that
is foamed-in-place with a sheet
metal interlock to insure permanent
attachment.
• Magnetic door gaskets of one piece
construction, removable without tools
for ease of cleaning.
• Door is field reversible.
LIGHTING
• Incandescent interior lighting; safety
shielded.
MODEL FEATURES
• True heated cabinets are designed
to hold warm baked or cooked food.
Cabinets are not designed to heat
ambient or cold product.
ELECTRICAL
• Unit completely pre-wired at factory
and ready for final connection to a 115/
208-240/60 Hz. Single phase - 20 amp
dedicated outlet.
• Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Metal door handle.
Export units - consult factory.
Prison package options - consult factory.
Remote cabinets (condensing units
supplied by others), consult factory
technical service department for BTU
information.
84
3
/
4
"
(2153 mm)
36
7
/
8
"
(937 mm)
30"
(762 mm)
96
7
/
8
"
(2461 mm)
35"
(889 mm)
30"
(762 mm)
TG Specification Series:
Roll-Thru Solid Door Heated Cabinet
FRONT OF CABINET
