TOAM | OPEN AIR MERCHANDISER
TEC_TM_012 REV. B
09/25/2020
Page 11 of 20
truemfg.com
Cabinet Setup (cont.)
Shelf Light Installation
1.
Locate the LED power cord protruding from the inner back
wall. See fig.1.
2.
Gently pull the power cord and route it to the LED module,
located under the front lip of the shelf. See fig. 2.
3.
Insert the power cord into the LED module. See fig. 3.
4.
Secure the power cord to the J-clip retainer on the shelf
bracket. See fig. 4.
Price Strip Installation
1.
Holding the price strip and looking down its length from one
end, notice the larger (top) opening, and the smaller (bottom)
opening. See fig.1.
2.
Position the price strip across the front of the shelf, with the
large opening at the top and the smaller opening snapped
over the bottom edge of the shelf. See fig. 2.
3.
Snap the top of the price strip over the top of the shelf.
See fig. 3. Price tags can now be inserted into the channel in
the price strip.
Fig. 1.
Locate the LED power cord.
Fig. 1.
The large and small openings in the price strip.
Fig. 2.
Proper positioning of the shelf strip during installation.
Fig. 3.
Correct installation of the price strip.
Fig. 2.
Route the power cord to the LED module.
Fig. 3.
Insert the power cord into the LED module.
Fig. 4.
Secure the power cord.
Large opening
Small opening
