STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation
Right
Plan
3D
PLAN VIEW
KCL
TSID-72-3 TFQY21E
TFQY45S
TFQY21P
TFQY213
TSID-72-3
DESIGN
• True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures, and
lower utility costs in an attractive display
case that brilliantly displays deli meats and
cheeses.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using environmentally
friendly (CFC free) 134A refrigerant.
• Gravity coil refrigeration system provides
high humidity environment for exceptional
preservation of meats and deli products.
• Extra large evaporator coil balanced with
higher horsepower compressor and large
condenser; maintains cabinet temperatures
of 38°F to 40°F (3.3°C to 4.4°C).
• Automatic defrost system; time-initiated,
time-terminated.
• Condensing unit located behind grill in
back of unit. Entire system slides out for
easy cleaning and maintenance.
CABINET CONSTRUCTION
• Exterior - non-peel or chip laminated vinyl;
white sides with black front and back grills.
• “Low-E”, double pane thermal front
viewing glass provides maximum insulation
value for greater effi ciency and energy
savings.
• Front viewing glass slanted 12.52° to
minimize refl ection from overhead lighting
enhancing your cold product presentations.
• Stainless steel counter top provides surface
for equipment such as registers and point-
of-purchase novelties.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless steel
fl oor with coved corners.
• Insulation - entire cabinet structure is
foamed-in-place using high density, CFC
free, polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fi tted with leg levelers.
DOORS
• Rear door assemblies feature “Low-E”,
double pane thermal glass. The latest in
energy effi cient technology.
• Each door fi tted with a 12" (305 mm) long
handle.
• Self-closing doors. Sliding doors ride on
stainless steel V-Channel with stainless steel
bearings for smooth, even positive closure.
Doors fi t within plastic channel frame.
SHELVING
• Two (2) adjustable, heavy duty PVC coated
wire shelves. Top shelf dimension is 67
3
/
4
"L
x 17
1
/
2
"D (1721 mm x 445 mm). Bottom
shelf dimension is 67
3
/
4
"L x 19"D (1721 mm
x 483 mm). Four (4) chrome plated shelf
clips included per shelf.
• Aluminum shelf support pilasters. Shelves
adjustable on
1
/
2
" (13 mm) increments.
LIGHTING
• Case is equipped with three (3) light
sources located in the front, rear and under
the top shelf for maximum product display.
Fluorescent lamps are low UV emitting to
enhance product appearance and increase
shelf life.
• Cabinet lighting utilizes electronic ballast
and T-8 bulbs for brighter illumination,
longer bulb life and increased energy
effi ciency. Lamps are safety shielded.
MODEL FEATURES
• Evaporator is epoxy coated to eliminate
the potential of corrosion.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for fi nal connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord and
plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒
230 - 240V / 50 Hz.
❒
6" (153 mm) standard legs.
❒
6" (153 mm) seismic/fl anged legs.
❒
2
1
/
2
" (64 mm) diameter castors.
❒
4" (102 mm) diameter castors.
❒
Ratchet locks (requires 2).
❒
Additional non-lighted shelves (lighted
shelf available as replacement only).
❒
Low height models with 41
3
/
4
" (1061 mm)
work surface height.
❒
Remote cabinets (condensing unit supplied
by others; system comes standard with
404A expansion valve and requires R404A
refrigerant), consult factory technical
service department for BTU information.
115/60/1
NEMA-5-15R
REAR VIEW
RIGHT VIEW
Display Case:
Single Duty Deli Case
23
1
/
2
"
(597 mm)
72
1
/
2
"
(1842 mm)
50
1
/
4
"
(1277 mm)
30
1
/
2
"
(775 mm)
12
1
/
32
"
(306 mm)
13
/
16
"
(21 mm)
29
5
/
32
"
(741 mm)
21
1
/
2
"
(547 mm)
29
3
/
4
"
(756 mm)
13
/
16
"
(21 mm)
19
/
32
"
(16 mm)
3
/
16
"
(5 mm)
19"
(483 mm)
17
1
/
2
"
(445 mm)
12.52°
