CHAPTER 2: ASSEMBLY INSTRUCTIONS
Truefitness.com / 800.426.6570 / 636.272.7100
20
BIKE ASSEMBLY STEPS (continued):
Auxiliary Power Supply Installation Step C (remove wire tie):
a)
Remove the wire-tie shown in the provided
This will release the Power Supply Input Plug
*Use caution not to drop the loose wire-tie into
the machine after it has been removed
Auxiliary Power Supply Installation Step D (input plug connection):
a)
Connect the Input Plug to the Power Supply
NOTE
: If necessary, the Mast Boot (installation
step # 6) can be removed to allow more access
to the Power Supply cable connections
Auxiliary Power Supply Installation Step D (output plug connection):
Remove wire-tie
Input Plug
Raise Mast Boot (Optional)