CHAPTER 2: ASSEMBLY GUIDE
Truefitness.com / 800.426.6570 / 636.272.7100
14 of 41
PRE-ASSEMBLY CHECKLIST:
Measure Doorways:
Measure all doorways, hallways and stairwells to make sure that the 34” frame can fit through them. If it will not
fit, move all parts to the final location and assemble machine in that location. If the machine needs to be placed
on its side, keep the left side Styrofoam attached to the Base to help avoid damaging the plastic covers.
Please Note When Moving The Elliptical:
Pre-Assembly Checklist:
Tools Required:
10 mm hex key (Included)
8 mm hex key (Included)
6 mm hex key (Included)
#2 Phillips screwdriver
17 mm socket
Hardware:
Hardware is packaged in
numbered plastic bags that
correspond to the step with
which they are used. Not all
steps require hardware.
Elliptical base can be set
on its LEFT side, but
ONLY with the attached
styrofoam underneath it.