background image

CHAPTER 7: WARRANTY INFORMATION

Truefitness.com / 800.426.6570 / 636.272.7100

41 of 41

COMMERCIAL LIMITED WARRANTY

XC900

Commercial Warranty Registration

Thank you for purchasing a TRUE product.  To validate the TRUE product warranty the fast and easy way, 

please go on-line now to truefitness.com and register your product.  The information you provide will never 

be distributed to any other individuals or agencies for any purpose.  If you prefer to mail your warranty card, 

have the owner of the product complete the information below and return it to TRUE Fitness within 30 days 

from the date of equipment installation. 

Please Note:  Failure to register this product will result in no servicing or authorization of parts to be shipped.

To mail your warranty information, please fill in the information below and mail to:  Service Dept., TRUE Fitness, 

865 Hoff Road, St. Louis, MO 63366 (or save postage and register online at www.truefitness.com)

    

PLEASE PROVIDE BOTH SERIAL NUMBERS BELOW. 

REQUIRED FOR WARRANTY REGISTRATION:

CONSOLE SERIAL NUMBER:

BASE SERIAL NUMBER: 
 

Model Type                                                                                               
Date of Purchase                                                                                    
Your Company Name                                                                             
Contact First Name                                                                                 
Contact Last Name                                                                                 
Address                                                                                                      
City                                                     State                  ZIP                       
Email Address  

 

Website                                  

Phone  

 

Fax   

 

1. Where did you first learn about TRUE? 

___ a.  Dealer 

 

____ b.  Website

____ c.  Advertisement 

____ d.  Referral     

____ e.  Current Customer   ____ f.  Other_______________

2.  Why did you purchase a TRUE product?

___ a.  Design/Appearance     ___  b.  Dealer Suggestion       

___ c.  Price/Value           

 ___  d.  Quality Construction   

___ e.  Performance 

 ___  f.   TRUE Reputation

___ g.  Other_________________________

3. Please indicate your type of facility: 

___  a.  Apartment/Condo        ___  b. Corporate Fitness Center 

___  c.  Municipality  

  ___  d. Health Club/Gym/Spa 

___  e.  Hotel/Resort 

  ___  f.  Military Base

___  g.  Student Rec Center      ___  h.  Other

4. What other types of equipment does your company currenly own? 

___ a.  Treadmill       

Brand ________________    

___ b.  Bike                   

Brand ________________    

___ c.  Elliptical      

Brand ________________  

___ d.  Free Weights/Gym    Brand ________________   

5. How many people use your facility on a daily basis? 

___  a.  <25 

 

      ___  b. 25-75 

___  c.  76-150  

        

      ___  d. 150+

6. Do you plan to purchase more fitness equipment 

in the next 6-12 months?   

 ____   Yes    ____   No

7. If you answered “yes” to question 6, what type do you

plan to purchase? 

____ a.  Treadmill   

____ b.  Elliptical

____ c.  Stationary Bike    

____ d.  Free Weights

____ e.  Gym 

 

____ f.  Other ______________

8. Would you recommend TRUE to other club owners?

 ____   Yes    ____   No

9. You are a valued TRUE customer and your suggestions 

allow us to continually improve your experience.  Is there 

anything else you would like us to know?  Please explain: 

Summary of Contents for XC900










































Reviews: