Section D
53
Manual Mode
Helpful Operation (Continued)
1. Press
three times.
The DISTANCE and TIME/PACE Windows will blink and the following
messages will repeat themselves in the Message Center one at a time:
ADJUST TIME
+
ADJUST DISTANCE
PRESS START
2. Use
to enter a value for time.
3. Press
to enter a value for distance.
4. Press
.
The following messages will repeat themselves in the Message
Center one at a time:
MANUAL
EDIT-SELECT
NEXT UP/DOWN
PRESS START
NOTE:
When using the countdown feature, both time and distance
functions will give you an audible signal and begin counting
up when the time or distance has reached “0”. The tread belt
will continue to move.
Workout Instructions
1.
Press
to start the belt in motion.
The Upper Control Panel gives audible signal three times.
2.
Hold the handlebar, carefully step onto the tread belt, and
begin walking.
3.
Adjust the speed or grade:
a.
Use
to input the numeric value.
The following message will display in the Message Center:
DATA= (XXX)
Continued on Next Page
Summary of Contents for ZTX 825
