4
Don’t make any calls until you have completed steps 1 - 5 below!
trueCall can operate from any telephone socket in your house. If you
have a cordless phone system, locate it near the base station,
otherwise install it close to the phone you use most often - you want
to be able to easily check trueCall to see if you have any messages.
Unplug your telephone’s lead from the wall socket (or the telephone
lead from your cordless phone base station), and replace it with
trueCall's telephone lead.
If you have broadband on your home
phone line, you
must
plug trueCall’s lead into a broadband splitter.
Plug your telephone’s lead (or the lead from your cordless phone
base station), into the socket at the back of trueCall. trueCall takes
messages for you, so disconnect any answering machine or switch
off your phone’s answering facility.
Plug the mains adaptor into the power socket at the back of trueCall
- the LEDs will all flash for about a minute and will then stop with just
the green LED and blue button lit.
Wait by your phone for a minute and trueCall will ring you. Pick up
the phone and follow the instructions to record a short personal
greeting so that your callers know that they have got through to the
right number. If trueCall doesn’t ring, then you can record these
through the setup menu (see
Change your Personal Greeting
in the
trueCall Reference Guide page 18).
You are now ready to go!
1
2
3
4
5
Setting up trueCall
Broadband splitters
