1. Safety
Read all instructions and safety precautions before operation.
Indicates a hazardous situation, which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation, which, if not avoided, could result in minor or moderate injury.
NOTICE
Indicates a situation that could result in damage to the equipment or other property.
• Risk of fire or explosion! Solvent and paint fumes can explode or ignite,
causing severe injury and property damage.
• Paints and solvents containing HALOGENATED HYDROCARBONS can react
explosively with aluminum. Always check the product’s label before using
these materials in the unit.
• Hazardous vapors: Paint, solvents, insecticides and other materials may be
harmful if inhaled, causing severe nausea, fainting or poisoning.
• Make sure the room is well ventilated. Avoid all ignition sources, such as
static electricity, sparks, open flames, hot objects, sparks from connecting
and disconnecting power cords, and working light switches.
• Follow the material and solvent manufacturers’ safety precautions and
warnings. Do not use liquids with flash points less than 100° F (38° C).
• Static electricity can be produced by HVLP spraying. Make sure any
electrically conductive object being sprayed is grounded to prevent static
sparking. The sprayer is grounded through the electrical cord to prevent
static sparking.
• Use a respirator or mask whenever there is a chance that vapors may be
inhaled. Read all instructions with the mask to ensure that the mask will
provide the necessary protection against the inhalation of harmful vapors.
NOTICE
Tipping the spray gun causes the spray gun to clog. Dried spray material also clogs the pressure
delivery tube and fittings. The spray gun does not function when clogging occurs.
Summary of Contents for Apollo 7500 AtomiZer
Page 32: ...8 Diagram Parts List...
