6
1
TECHNICAL SPECIFICATIONS
Input voltage
100-240V
Input frequency
50/60 Hz
Output voltage
24V
Output current
4A
Output power
96W
Average efficiency in active mode
88.55%
Efficiency at low load (10%)
91.93%
Power consumption in the no-load state
< 0.15W
Frequency
50/60 Hz
Operating temperature
5 - 35°C
Storage temperature
0 - 40°C
Storage humidity
25% - 75% RH
Operating pressure
860 - 1060 Pa
Emitted wavelengths
510 - 1100 nm
Optical light
2.8 - 4.8 J/cm² according to the selected setting
Maximum optical energy
14.88 J
Pulse duration
1 - 3 ms
Number of levels
1 - 5
Number of flashes
600 000
FURTHER INFORMATION
1) For households: The symbol (crossed-out wheelie bin) on the product or in the accompa-
nying documentation means that used electrical and electronic products must not be disposed
of along with your other household waste. In order to dispose of the product properly, please
return it to a designated collection point, where it will be accepted free of charge. By ensuring
this product is disposed of correctly, you will help prevent potential negative consequences for
the environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. Contact your local authority or the nearest collection point for further
details. Improper disposal of this type of waste may result in penalties in accordance with nati-
onal regulations. Information for users on disposal of electrical and electronic equipment (cor-
porate and business use): For proper disposal of electrical and electronic equipment, please
contact your dealer or supplier for detailed information. Information for users on disposal of
electrical & electronic equipment in other countries outside the European Union: The above
symbol (crossed-out wheelie bin) is only valid in European Union countries. For proper disposal
of electrical and electronic equipment, request detailed information from your authorities or
equipment dealer. Everything is expressed by the crossed-out wheelie bin symbol on the pro-
duct, packaging, or printed materials.
2) Apply for warranty repairs of the device at your dealer. In case of technical problems and
questions, contact your dealer, who will inform you about the further steps to be taken. Follow
the rules for working with electrical equipment. The user is not authorized to disassemble the
device or replace any part of it. There is a risk of electric shock when opening or removing covers.
You also run the risk of electric shock if the device is incorrectly assembled and reconnected.
The warranty period for the products is 24 months, unless otherwise stated. The warranty does
not cover damage caused by non-standard use, mechanical damage, exposure to aggressive
conditions, handling contrary to the manual and normal wear and tear.
The manufacturer, importer or distributor are not liable for any damage caused by installation
or improper use of the product.
DECLARATION OF CONFORMITY
The company elem6 s.r.o. hereby declares that all TrueLife devices are in compliance with the
essential requirements and other relevant provisions of Directives 2014/30/EU and 2014/35/EU.
The products are intended for sale without restriction in Germany, the Czech Republic, Slovakia,
Poland, Hungary and other EU member states. The declaration of conformity can be downloa-
ded from the web at
www.truelife.eu/support/doc
.
Manufacturer:
elem6 s.r.o.,
Braškovská 15, 16100 Prague 6, Czech Republic
Printing errors and changes to the manual reserved.
