Pole Mounting.
Camera and control box ship with pole mounting brackets attached.
Use included straps to secure unit to pole or similar structure.
Wall Mounting.
Camera may also be mounted
to flat surface such as a wall
by removing pre-attached
pole mount.
To do so, remove camera from base
using included Torx key, then loosen
the four screws securing base to
mounting plate. This will let you
access the screws to remove
mounting plate from pole mount
(requires T20 Torx driver, not included).
Attach mounting plate to wall or other flat surface, reattach base, then secure
camera to base. We strongly recommend that only hand tools, no power tools, be
used when mounting or adjusting camera.
MOUNTING
MOUNTING
AIMING
Mounting
Plate
Base
Indoor Camera Installation Manual
4K Ethernet
Mount & Aim Your Camera
Use included Torx key to aim camera as desired.
Final Preparation.
Remove the plastic cover from camera lens before use.
