Clean all process chemicals from the device. Fully rinse the flow path. Please
pay close attention to the process fittings. All media must be removed before
returning. This is particularly important, if the medium to be measured is health
hazardous.
WARNING!
With the flowmeter send a detailed report describing the failure, the application
and the physical-chemical properties of the medium parameters. (e.g. a
decontamination declaration).
WARNING!
Devices judged to be insufficiently cleaned will be returned to sender. No inspection of device will
be done until proper cleaning is completed by user.
In order to be able to process your repair order quickly and smoothly it is important that you provide
a technical contact person including phone and fax number as well as e-mail address.
Costs due to inadequate cleaning of the instrument for possible disposal or injury (burns, etc.) will
be charged to the sender of the meter into account.
Before sending the flowmeter Flowmeter for repair, the following precautions must be taken:
Repair, Hazardous Substances
24
PVDF-PE Plastic Ultrasonic Flow Meter
ULTRAFLO 5000
Distributed By Aetna Plastics
www.aetnaplastics.com
Aetna Plastics - Phone 800.634.3074 - Fax 216.524.2280 - Email sales@aetnaplastics.com