S. 17
Fill up syrup tubing
The concentrate needs to aspirated into the tubing. For that open the “Cleaning” Tab and select
“manual cleaning”:
To aspirate the active concentrates, place a cup under the water outlet, press and hold each
concentrate button until the fluid changes its color.
This step is necessary whenever an empty liquid container is replaced by a new one.
Adjust concentrate suction
The suction responsible for the syrup to flow properly needs to be adjusted. This needs to be done to
prevent liquid staying within the outlet after a finished tapping process.
An adjustment screw for this purpose is located at the top left corner in the cabinet as shown on the
picture: