S. 25
Closure after tapping
Tap window is closed after tapping or timeout and the screen saver is displayed; if the setting is
deselected, the tap window remains open and the screen saver is not switched to
Show table of contents
A button for calling up tables of contents is displayed in the tap window.
For this purpose, an image file named "Content.jpg" must exist in the subfolder "Contents". There
must also be a file "Content.pdf" with the tables of contents in PDF format. This file is automatically
converted page by page into single images. So there should be content of one product per page.
No tap break possible
If this option is activated, an ongoing tapping process cannot be interrupted.
If this option is deselected, a button is available for abort (red "X")
Quick start tap
If the customer has made the last selection for tapping, the tapping process starts automatically.
If the option is deselected, a button appears to start the tapping process.
"progress bar"
Selection of the color of the progress bar during the tapping process
Control
The control box is automatically recognized after connection to the USB interface (see figure).
Test mode without IQ-Box
Test operation without control of the control box. The control is displayed in an additional window if
the screen size is sufficient. If "IQ Fullscreen" is selected, the entire screen is used and the control
box is hidden.
"Input-1" and "Input-2"
Graphically displays the status of the control box inputs. The function of the inputs can be checked
here. Depending on the design of the control box, there may only be one switching input! (IQ-BOX V5
to 6/2016 has only one control input)
System Restart
The system is restarted at the specified time. This restart is performed daily and is used to keep the
operating system stable. The reboot should be performed outside normal operating hours. The IQ-
Quantum software is automatically started after the restart.
