22
Error
Rectification
LED flashes** 4 x
Defective wiring.
Temperature sensor or ca-
ble defective.
Address defect in wiring.
Replace temperature sensor.
LED flashes** 5 x
Temperature sensor or ca-
ble defective.
Replace temperature sensor.
* Reset the flash code:
takes place automatically after addressing the cause.
** Reset the flash code:
disconnect the mains voltage after addressing the cause
and disconnect battery (approx. 1 minute).
Flashing frequency:
0.2 s on, 0.2 s off, period between the flashing sequence 2 s.
If this does not solve the problem, please contact the
Truma Service.
Accessories
Quickpower terminal clamps
For fast manual connection
and release of the battery con-
nections. Suitable for all DIN
and SAE connections
(part no. C11000-02100).
Mover® FuseSet
Two fuse holders with fuses
for the measuring line – 2 A –
and the positive charging line
30 A – (part no. C11000-07300).
