9
8
Calf Massager Installation
Adjusting Your Massage Chair
Adjusting Your Massage Chair
Do not place your chair near any areas that may
suffer from moisture or wetness.
Avoid placing your chair in direct sunlight or near
heating appliances.
Always place your chair on an even and supported
surface to avoid accidents and injuries.
Placing Your Massage Chair
What to Do Before Using Your Chair:
•
Check the clearance by fully extending your chair in all directions. Make sure there are
no obstacles in your way such as pets, children or side tables.
•
Monitor the power plug and source. Clean the plug and cord routinely to avoid dust
buildup. Make sure the plug rests comfortably and protected between the power
source and the chair. The cord should never sit under a heavy object or appear to
have kinks, stretching or knots.
•
Place the chair away from walls. The chair should sit out at least 4 inches from the
wall starting from the backrest and at least 12 inches from the front of the leg rest.
4in
12in
Distance from Wall (Front and Back)
2. Insert the
inner and outer caps
for the
pegs
on the left and right sides of the calf
massager. Then remove the
cover
from the
hinges
on the left and right sides of the
MC-3500. Remove the screws from both hinges and lift them up.
Outer Cap
Inner Cap
Peg
Hinge
3. Place the calf massager onto the
hinges
located on the MC-3500 frame. Then close
the hinges and fasten it with the previously removed
screws
. Finally, snap the hinge
cover
back into place.
