E529EN_04.DOC
Safety
3
1. Safety
¾
Read the Operator's Manual and the general safety rules
(Material number 1239438, red document) in their entirety
before starting up the machine. The directions contained
therein must be followed without fail.
¾
Read the Operator's Manual and safety instructions (Material
number 125699, red document) in their entirety before starting
up the machine. The directions contained therein must be
followed without fail.
¾
The safety regulations according to DIN VDE, CEE, AFNOR
and other regulations which are valid in individual countries
must be adhered to.
Danger
Lethal danger due to electric shock!
¾
Always pull the plug out of the socket before undertaking any
maintenance work on the machine.
¾
Always check the plug, the cable and the machine for
damage before starting work.
¾
Keep the machine dry and do not operate in damp rooms.
¾
When using the electric tool outside, connect the residual
current (FI) circuit breaker with a maximum release current of
30 mA.
Warning
Danger of injury due to improper handling!
¾
When working with the machine, wear safety glasses, hearing
protection, protective gloves and work shoes.
¾
Do not plug in the plug unless the machine has been
switched off. Pull out the mains plug after use.
Warning
Risk of injury to the hands!
¾
Do not place your hand inn the machining path.
USA/CAN
Rest of the world
