4.1
Working with TruTool N 1000
1
On switch
2
Off switch
3
Release switch
Fig. 9306
1. Put the machine in position in front of the tool.
2.
Either
Ø
To switch the machine to continuous operation:
−
Keep the release switch (3) pressed.
−
Press the On switch (1).
The switch remains engaged. The motor is running.
or
Ø
To switch the machine to instantaneous connection:
−
Press the release switch (3).
−
Press the On switch (1) and Off switch (2) at the same
time.
The motor is running.
3. Once the full speed has been reached: move the machine
toward the workpiece.
4. Process the desired cutting line.
5. If the cutting track ends in the sheet: retract the running
machine a few millimeters in the direction of the already free-
cut cutting track.
6. Press the off switch (2).
4.2
Changing the cutting direction
In situations where space is limited, the tool can be mounted in
such a way as to have a different cutting direction
(see "Fig.
54784", pg. 5)
■
For cutting profiles: mount the tool at an angle of 90° either
to the left or to the right.
■
For nibbling to the rear: mount the tool at an angle of 180°.
1. Undo the clamping screw (14).
E232en_06
Operation
15
Positioning the machine
Switching on
Processing the material
Switching off
