− Press the release switch (3).
− Press the On switch (1) and Off switch (2) at the same
time.
3. While the motor is running down, turn the gear switch to the
desired position.
3.7
Accessories included
Securing the chip box
Chips that fall away during machining are collected in the chip
box.
1
Screw
2
Locking bar
3
Chip box
Fig. 54642
1. Push the chip box (3) onto the clamping plate.
2. Loosen screw (1).
3. Turn the locking bar (2) downward.
4. Retighten the screw (1).
The chip box is secured against dropping out.
E681en_02
Accessories included
17
