4.
Operation
4.1
Working with
TruTool TKF 1500 (1A1), (1B1)
Damage to property due to turning the gear switch during
operation.
Damage to the gearbox can be a consequence.
Ø
Use the gear switch only when the motor is running down or
at rest.
1
On switch
2
Off switch
3
Release switch
Fig. 9659
1. Performing setting work .
2. For TruTool TKF 1500 (1B1): select gear.
3. Press release switch (3) and On switch (1).
On switch (1) remains engaged. The motor is running.
4. To switch the instantaneous connection: press the release
switch (3), then press the On switch (1) and Off switch (2)
together at the same time.
Notes
■
Do not move the machine towards the workpiece until full
speed has been reached.
■
In order to improve the cutting result and increase the
service life of the cutting tool, coat the cutting track with
oil before machining the workpiece.
5. Processing the material:
28
Operation
E681en_02
CAUTION
Switching the machine on
and working
