3
TPN-875
101072
3/8”
3/8”
98 dB
Air angle grinder
4.6 CFM
11000 RPM
3.9 lb
Code
Description
4 1/2”
Disc Diameter
Spindle Diameter
Vibration Level
Noise Level
Free Speed
Weight
Air Consumption
Hose Minimum
Recommended Diameter
621 kPa (90 PSI)
Air Pressure
< 1.6 m/s
2
Technical Data
Filtering and Lubrication Requirements
Disc
(not included)
Dust, water and lack of oil specific for pneumatic tools are the main cause of potential flaws with the tool. We
recommend installing a Brand
UNI-LL-1/4
centralized filter-oil feeder system. This system assures lubrication
reducing 80% oil consumption significantly increasing the breathing air quality for the operator.
• The filter-oil feeder system must be regulated to administer 3 to 6 drops per minute.
• Drain the water in the air compressor tank and also condensation in the hoses before using the tool.
Consult the air compressor instructions.
CAUTION
Please consider the increase in pressure in the line or the hose inside diameter to compensate the use
of too long hoses (more than 8 meters). The hose minimum inside diameter shall be 3/8” and the connectors shall be
1/4 NPT. Use the right size and good quality couplers and accessories.
CAUTION
Air Hose
UNI-LL-1/4
Centralized
Filter-Oil
Feeder System
Adapter
(not included)
Air
Compressor
ENGLISH
Summary of Contents for 101072
Page 10: ...Notes 10 ENGLISH...
Page 15: ...Notas 10 ESPA OL...
