Truper 101509, Manual

9

Troubleshooting

ENGLISH

The vacuum cleaner is 

not working.

Dust comes out of the 

motor cover.

Reduced motor 

efficiency and 

vibration / speed.

• No power.

• Defective cable.

• The container is full.

• The filter cartridge is not set 

or is damaged.

• There is a blockage in the 

nozzle, hose or container inlet.

• The filter cartridge is clogged 

due to the presence of fine 

dust.

• Check the power supply, cable, circuit switches, fuses.

• Unplug and check the electric cable. If damaged, have it repaired 

in a                                 Authorized Service Center.

• Empty the container.

• Set or replace the cartridge filter.

• Check nozzle, hose and container inlet for blockage.

• Remove the filter and clean it or install a new one.

Problem

Cause

Solution

Maintenance

• After each use, remove the residue from the container 

and hose.

• Always keep the ventilation openings of the motor cover 

free and clean. Blow out regularly with compressed air or 

clean with a brush.

• The carbons should be checked periodically, and always 

be replaced by a                                 Authorized Service 

Center when they have worn out.

• After they have been replaced, ask to inspect if the new 

carbons can move freely in the carbon holder and request 

that the tool be turned on for 5 minutes to match the 

contact of the carbons and commutator .

• Only genuine                                 eplacement carbons, 

specifically designed with the proper hardness and 

electrical resistance for each type of motor, should be 

used. Out of specification carbons may damage the motor.

• When changing carbons, always replace both carbons.

• Tools should only be serviced at a                               

Authorized Service Center. Service and maintenance by 

unqualified persons can be dangerous and may result in 

personal injury and void the product warranty.

• When servicing a vacuum cleaner, ask that only genuine 

replacement parts be used. Use of unauthorized parts, or 

failure to properly maintain may create a risk of 

electrocution or injury.

Cleaning

Carbon brush replacement

Service