A1
A2
B
F
D
E
Rubber
washer
Pump
Assembly
Fuel Supply
7
• Check that all connections are tight and have their
respective rubber washer.
• Follow the safety rules for fuel handling (page 5).
• Wait for the engine to cool down completely before
refueling.
• Install the equipment on a flat surface.
• Clean around the fuel tank cap to prevent contamina-
tion.
• Slowly loosen the fuel tank cap.
• Taking care to avoid spillage, pour the fuel mixture into
the tank. Follow the fuel specifications
(page 3).
• Before capping the fuel tank, check and clean the
gaskets.
• Immediately install the fuel tank cap and tighten it by
hand.
• Wipe up any spilled fuel.
On a new engine, smoke emissions are
normal during and after first use.
ENGLISH
• Before starting to operate the equipment, its parts and accessories must be properly assembled and in the correct
position.
• Connect the end (
A1
) of the hose to the pump.
• The long reach gun (
F
) can be connected to the end (
A2
) of the hose.
• To use the nozzles (
E
) connect the end (
A2
) of the hose to the valve handle (
B
).
• Connect the spear (
D
) to the valve.
• One of the included nozzles (
E
) can be attached to the lance.
Nota: For a larger spray area connect the “Y” adapter to the pump outlet and assemble both hoses together.
NOTE
CAUTION
CAUTION
