A1
• Before starting to operate the equipment, its parts and accessories must be properly assembled and in the correct
position.
• Connect the end (
A1
) of the hose to the pump.
• The long reach gun (
F
) can be connected to the end (
A2
) of the hose.
• To use the nozzles (
E
) connect the end (
A2
) of the hose to the valve handle (
B
).
• Connect the spear (
D
) to the valve.
• One of the included nozzles (
E
) can be attached to the lance.
Nota: For a larger spray area connect the “Y” adapter to the pump outlet and assemble both hoses together.
NOTE
B
F
G
F
D
E
Rubber
washer
Assembly
Fuel Supply
7
• Check that all connections are tight and have their
respective rubber washer.
• Wait for the engine to cool completely before refueling
or oiling.
• Install the equipment on a flat surface.
• Clean around the fuel and oil tank caps to avoid
contamination.
• Slowly loosen the fuel tank cap.
• Being careful to avoid spills pour the fuel into the tank (
F
).
• Before capping the fuel tank check and clean the
gaskets. Immediately install the fuel tank cap and tighten it
by hand.
• Wipe up any spilled fuel.
• Slowly loosen the oil tank cap.
• Fill the tank with SAE-10W/30 4-stroke gasoline engine
oil (
G
). The oil should reach the top of the oil filler neck.
• Install the oil tank cap and tighten it by hand.
Pump
A2
ENGLISH
