3
CLNE-18
13180
110 PSI
Pneumatic brad nailer
3/8” to 2”
100 nails
18
Code
Description
Recommended Operation Pressure
Maximum Pressure Allowed
Cartridge Capacity
Nail Gauge
Nail Length
3/8”
1/4 NPT
Air Intake Connection
Hose Inner Diameter
75 PSI - 110 PSI
Technical data
Filter and lubrication requirements
ENGLISH
An increase in the pressure in the line or the inner diameter in the hose diameter shall be considered to
compensate the use of very long hoses (longer than 26.2 ft). The hose minimum inner diameter shall be 3/8” and the
connectors shall be ¼ NPT. Use good quality couplings and accessories with the right size.
CAUTION
Dust, water and oil specific for using in pneumatic tools are the main cause of potential flaws with the tool. We
recommend installing a Brand
UNI-LL-1/4
centralized filter-oil feeder system. This system assures
lubrication reducing 80% oil consumption significantly increasing the air quality the operator breaths.
• The filter-oil feeder system must be regulated to administer 3 to 6 drops a minute.
• Drain the water in the air compressor tank and also condensation in the hoses before using the tool. Consult the air compressor
instructions.
CAUTION
Air Hose
Conector
UNI-LL-1/4
Centralized Filter-Oil
Feeder System
Air
compressor
