TRUST 2 PORT USB 2.0 PCI CARD
3
U K
9.
Connect the power cable to the wall socket.
10.
Turn on your computer and start Windows.
11. Windows
will detect new hardware (VIA Tech 3039 PCI to USB Universal
Host Controller).
12.
Click on 'Next'.
13.
Select ‘Search for the best driver for your device (Recommended)’.
14.
Click on 'Next'.
15.
Points 12 to 15 will be repeated a number of times.
16.
Follow the on-screen instructions to complete the installation.
4
Checking after the installation
After installing the device and the driver, the following are installed on your computer
and can be checked (see figure 3).
‘Start – Settings – Control Panel’. Double-click on the ‘System’ icon and select the
‘Device Manager’ tab.
-
Universal Serial Bus controllers
The following devices have been installed:
USB 2.0 Root Hub Device.
USB Root Hub.
USB Root Hub.
VIA Tech 3038 PCI to USB Universal Host Controller.
VIA Tech 3038 PCI to USB Universal Host Controller.
VIA USB 2.0 Enhanced Host Controller.
Note:
Deviations may also occur as a result of using new drivers available on
the Internet.
Note:
The location or name may vary in the ‘Control Panel’ for different
operating systems.
