Freewave
– Wireless Headset
Installation
A. Headset
B. LED light
C. USB connection
D. USB charge cable
E. USB receiver
F. USB extension cable
- Before using the headset needs to be fully charged.
- Connect the USB charge cable to the headset and your computer to charge the headset.
- When connected the LED light will turn red when charging.
- The LED light will go off when the headset is completely charged.
- Put the USB receiver in the extension cable
- Connect the extension cable to your computer
- Turn on the headset
- The LED light will turn green when it’s connected.
Configuration
Windows 7/ Vista
Go to ‘Playback Devices’ to configure the microphone
Set the ‘2.4G Wireless Headset’ as your default device
- Select the ‘Recording’ tab
- Double click the ‘Microphone’
Set the level to 100%
Windows
XP
Go to ‘Adjust Audio Properties’ to configure the microphone
- Set the default device to ‘2.4G Wireless Device’ (voice and recording)
- Go to the ‘Voice’ tab.
Click the ‘Volume’ of the Voice recording.
Set the level to 100%
- Turning the left ear pad will increase or reduce the volume
- Turn the microphone to the highest position to mute the microphone
3
6
12
11
10
9
8
7
5
4
2
1