TRUST 350FT POWERC@M FLASH
26
11. Troubleshooting
Method
1. Read the solutions given below.
2. Check for up-to-date FAQ’s, drivers and instruction
manuals on the Internet
www.trust.com/13136
Problem
Cause
Possible solution
The computer's USB
port does not work.
Try a different USB port or connect
the device to a different computer.
The camera has not
been connected to a
USB port.
Connect the camera to a USB port
(see chapter 8).
Windows does not detect a
new device after connecting
the camera.
The camera is
connected to a USB
hub which does not
have a power supply.
Connect the camera to a USB hub
which has a power supply or to a
USB port on your computer.
The computer becomes
jammed when using the USB
connection.
The USB port has
shared an IRQ with
another device.
Check your computer’s USB
settings.
The batteries are
empty.
Replace the batteries (see chapter
3).
The camera does not do
anything.
The batteries have
been inserted
incorrectly.
Reinsert the batteries (see chapter
3). Duracell Ultra batteries are
recommended.
The camera does not react,
although the batteries are full.
There is a fault with the
camera.
Remove the batteries from the
camera for at least 1 minute to
reset the camera. Reinsert the
batteries into the camera. The
camera should now work.
The power in the
batteries is low.
Replace the batteries (see chapter
3). Duracell Ultra batteries are
recommended.
NiCd or NiMH batteries
are used.
Use alkaline batteries. Duracell
Ultra batteries are recommended.
The camera suddenly turns
itself off.
The 'Auto-off' function
is turned on.
Turn the camera on again.
Only use the flash when
necessary.
The batteries become empty
quickly.
Using the flash causes
the batteries to become
empty more quickly.
Replace the batteries (see chapter
3). Duracell Ultra batteries are
recommended.
The USB symbol flashes
together with the counter in the
display.
The camera’s memory
is full.
Save the recordings in the
camera’s memory on your
computer and delete the images
from the camera’s memory (see
chapter 5.7).
The USB symbol flashes
together with the battery
indicator in the display.
The batteries are
empty.
Replace the batteries (see chapter
3). Duracell Ultra batteries are
recommended.
!
