TRUST 350FT POWERC@M FLASH
27
UK
Problem
Cause
Possible solution
The recordings are not clear
(hazy).
The focus (distance to
the object) is not
correct.
Select the MACRO function as
described in chapter 5.3.
No photograph is taken when
the exposure button is
pressed.
The camera is still busy
saving the previous
photograph.
Wait until the camera is ready.
There is a bad cable
connection.
Reconnect the cables (see chapter
8).
There is no connection with the
computer.
The 'Auto-off' function
is turned on.
Turn the camera on again.
The problem is not listed here.
The latest FAQ update
is available on the
Internet.
Go to
www.trust.com/13136
for
FAQ and other product
information.
Table 7: Troubleshooting
Check the FAQ's on the Internet (
www.trust.com
). You can also register your product at
www.trust.com
, so
that you can receive optimal guarantee and service support. You will be automatically informed of
developments to your product and other Trust products. You will also have the chance of winning some
spectacular prizes.
If you still have problems after trying these solutions, please contact one of the Trust Customer Care Centers.
The last page of this electronic instruction manual, as well as the back of the printed quick installation
manual, contains more information. Please have the following information available:
•
The article number. This is 13136.
•
Your hardware information.
•
Your operating system and the version.
•
A good description of what does not work.
•
A good description of when the problem occurs.