TRUST 913 POWERC@M ZOOM
8 Viewing
photos/videos
( )
U K
8.1
On the camera
In order to view the photos slide the mode switch to Playback mode
and switch
the camera on.
The default Playback method is to show each individual picture one at a time at full
screen size. Press the left (
Å
) and right buttons (
Æ
) to browse through the pictures
you have taken.
Enlarging
You can also use the Zoom buttons (T)/(W) to view a picture in more detail. The
default zoom setting is 1.0X.
Press the Zoom-in button (T) to increase the zoom ratio from 1.0X to 4.0X in steps of
0.5X .
Press the Zoom-out button (W) to decrease the zoom ratio.
Note:
the digital zoom function does not work in the Economy mode of 6.6 M
(2976 X 2232)
Thumbnail images
If you press the Zoom-Out button (W) when the zoom ratio is at 0.5X (default), the
camera switches to Thumbnail Review mode.
Up to nine pictures are shown on the LCD simultaneously in Thumbnail Review
mode. Use the up, down, left and right buttons to browse through the thumbnail
pages.
To return to Full-Screen Review, select the photo you want to view and press the
Shutter button. The selected picture will then expand to fill the entire LCD Screen.
Video recording
Press the shutter button to begin playing back. Press the button again to pause.
Press the button once more to continue.
Deleting a photograph or a video clip
Follow the steps given below to delete a recording.
1.
Press the left or right button to display the image you want to delete.
2.
Press the “MENU” button to enter the menu system.
3.
Use the ‘down” or “up” button to select [DELETE] (OSD NL). Press the right
button to enter the menu.
4.
Use the “up” or “down” button to select [YES] (OSD NL). or [NO] (OSD NL) .
Press the right button to confirm your choice.
5.
Press the “MENU” button to exit the menu.
6.
Repeat steps 1 to 5 to delete other images.
8.2
On the computer
This section explains how to connect your digital camera to a computer to download
pictures to a PC or to use as a PC camera.
You must carry out the following steps before connecting the camera to the
computer:
1. Install the driver program (for Windows)
Æ
Section 8.2.1.
2. Set the camera to “Card reader”
Æ
section 8.2.2
7
