TRUST 913 POWERC@M ZOOM
9 Other
settings
9.1
Setting the lighting value (Capture and Film mode)
Adjust the lighting value if the object is much brighter or darker than the background.
The available white balance values are between -2.0 to +2.0 EV in steps of 0.5 EV.
Use the left or right button (-/+) to select the EV value. The EV value appears on the
LCD Screen.
9.2
Flash (Capture mode)
The flash can be used when there is insufficient light and as additional light when too
much light comes from behind the object.
The flash will be charged when “On” or “Auto” (Automatic) has been selected. If the
batteries are fully charged this takes about 3 seconds. The LCD screen remains
blank during charging. The status light will flash.
Symbol Status
Symbol
[Off]
Flash is not in use.
[On]
The flash will be on for every photo to be taken.
Ideal as additional light (against the light)
[Auto]
(Automatic)
The flash will be used if there is not enough
light.
Table 5: Flash options
9.3
White balance (Capture mode)
Change the preset white balance setting to suit the lighting conditions in which the
picture is being taken.
Symbol Status
Symbol
Automatic White
Balance
Use the AWB setting to obtain the best lighting
for the photo.
Sun
For shooting outdoors or in brightly lit
conditions.
Fluorescent (strip
lighting)
For taking photos under fluorescent and strip
lights.
Shade (Shadow)
For shooting in shade.
Table 6: white balance settings
9.4
Resolution (Capture mode)
Photographs can be saved in the memory in five different formats. Using a smaller
format allows you to take more photos.
Adjust the image quality and resolution by selecting [RESOLUTION]
from the menu
display.
10
