TRUST 913 POWERC@M ZOOM
Start - Programs - … - …
-
Trust - Trust Photo Upload - Trust Photo Upload
-
Ulead Photo Explorer 8.0 SE Basic - Ulead Instant Viewer
-
Ulead Photo Explorer 8.0 SE Basic - Ulead Instant Viewer
-
Ulead Photo Explorer 8.0 SE Basic - Ulead Photo Express 8.0 SE Basic
-
Ulead Photo Explorer 8.0 SE Basic - Ulead Photo Express 8.0 SE Basic
U K
-
Ulead DVD PictureShow 2 – Ulead Disc Imager recorder
-
Ulead DVD PictureShow 2 – Ulead Disc Imager recorder
-
Ulead DVD PictureShow 2 – Ulead DVD PictureShow 2 SE Basic
-
Ulead DVD PictureShow 2 – Ulead DVD PictureShow 2 SE Basic
-
Ulead DVD PictureShow 2 – User Manual
-
Ulead DVD PictureShow 2 – User Manual
N.B.:
the information given above will vary when the installation has
been altered by the user (for example, not everything has been
installed or locations other than the default locations have been
specified).
N.B.:
the information given above will vary when the installation has
been altered by the user (for example, not everything has been
installed or locations other than the default locations have been
specified).
N.B.:
deviations may also occur as a result of using new drivers
available on the Internet.
N.B.:
deviations may also occur as a result of using new drivers
available on the Internet.
N.B.:
the location or name may vary in the Control Panel for different
operating systems.
N.B.:
the location or name may vary in the Control Panel for different
operating systems.
14 Solving
problems
14 Solving
problems
Method
Method
1. Read the solutions given below.
2. Check the up-to-date FAQ drivers and manuals
on the internet (www. trust.com/13835)
Problem
Cause
Possible solution
Press the power button to
turn the camera on.
The batteries are discharged.
Replace the batteries with
fresh ones. See section on
inserting the batteries.
The camera has no
power.
The camera is turned off.
The batteries are inserted
incorrectly. Check the battery
orientation. See section on
inserting the batteries.
Internal memory / Memory
card full?
Make a back-up your photos
and delete unwanted images
or format the internal memory
/ memory card.
The camera will
not take a picture.
Is the camera connected to
a computer?
The camera’s buttons are not
functional when connected to
a PC. Disconnect the camera
to take more pictures.
The flash does not
work.
Is the flash on?
Ensure the flash is set to
auto or always on. See
section on Flash.
!
17
