TRUST BT110 USB BLUETOOTH ADAPTER
7
UK
5. Connecting
The adapter can be connected to a free USB port on your computer after the driver for the Trust BT110 USB
Bluetooth Adapter has been installed and the computer has been restarted. This is carried out as follows.
1. Plug the Trust BT110 USB Bluetooth Adapter into a free USB port on your computer as shown in figure
10.
Figure 10: Connecting the Bluetooth Adapter
Note
:
The USB extension cable provided with the adapter can be connected between your Trust BT110
USB Bluetooth Adapter and the free USB port.
Note
:
The indicator (C, figure 1) will be lit when the Trust BT110 USB Bluetooth Adapter is connected to
a free USB port.
Windows will detect new hardware.
Follow the on-screen instructions. If Windows asks for a driver, insert the Trust Installation CD-ROM into your
CD-ROM drive and specify the location as [D:\driver].
Note:
In the example, the CD-ROM drive is indicated by “D:\”. This may be different for your computer.
6. Checking after the installation
6.1
Checking after the installation
After installing the device and the driver, the following are installed on your computer and can be checked:
Desktop
- Bluetooth network icon
:
Taskbar
- Bluetooth network icon
:
Start – Settings – Control Panel:
Bluetooth Configuration icon
‘Start – Settings – Control Panel’. Double-click on the ‘System’ icon and select the ‘Device Manager’ tab.
- Universal Serial Bus controllers – Trust BT110 USB Bluetooth adapter
‘Start – Settings – Control Panel’ and then double-click on the ‘Add/Remove Programs’ icon.
- Trust Bluetooth Software x.x.x.x
Note:
The information given above will vary when the installation has been altered by the user (for
example, not everything has been installed or locations other than the default locations have been
selected).