BT220 HEADSET
3
UK
Buttons
Headset indicators
Headset
Status
‘+’
(2)
‘-‘
(3)
Result
Blue
(4)
Red
(5)
Signal
(6)
Busy with call
on telephone
Press
quickly
Call transferred from
telephone to headset
Tone
Tel
headset on
without a call
Press
quickly
Speak assignment for
the telephone (must
support the telephone)
Tone
NOTE!
Pairing and use
•
The headset will ONLY work if the Bluetooth (BT) connection has been
paired
correctly.
•
The headset can only be used with BT devices which support the
Headset Protocol
(HP)
or the
HandsFree Protocol
(HFP).
•
The
pairing
mode only remains active for 2 - 3 minutes. If necessary, reactivate the pairing
mode (turn the headset off first).
•
After a successful BT connection, it will not be necessary to
pair
the devices again, even
after they have been turned off. However, if one of the devices has been
paired
with
another, similar, BT device, they will usually have to be
paired
again
.
•
The method of pairing and the use of BT can differ for different devices. See the
instruction manual provided with your other BT device for the correct method.
•
The original ring tone of the telephone can only be heard via this headset if it is a
polyphonic
ring tone and the telephone supports the transfer of this ring tone to a BT
headset. If not, you will hear a standard ring tone via the headset.
•
Some telephones disconnect the BT connection if the headset is turned off. In that case,
you will no longer hear the telephone ring via the headset. Solution: press the “+” button
for 1 sec. to reactivate the connection.
•
With some telephones, the “+” button must be pressed for 2 sec. to accept a call (e.g.
Sony Ericsson P800/900).
•
Some telephones are produced without optimal BT support. If you have a problem, check
whether the telephone has the most up-to-date BT version (
firmware
). Contact the
telephone manufacturer for more information.
•
An up-to-date list of telephones that can be used with this headset is available at:
www.trust.com/14219/compatibility.
•
The PIN code (1234) cannot be changed.
Bad wireless connection
