background image

BT220 HEADSET 

 5 

UK

 

Wireless 

• 

This wireless Bluetooth device works at a frequency of 2.4 GHz. It meets the essential 
requirements and other relevant conditions of R&TTE Directive 1999/5/EC. It is a Class 1 
wireless device and may be used in all EU countries. See www.trust.com/14219 for an up-to-date 
list of countries where the use of this product is permitted. (Note: this class indication is not the 
BT class.)

 

• 

There may be restrictions for the use of this device outside of the EU. If this device is used 
outside of the EU, check whether this device meets the local regulations. Frequency: 2.4 - 
2.4835 GHz; Bandwidth: approx. 1 MHz; Power: 1 mW.

 

• 

Nowadays, there are an increasing number of wireless products (video, audio, computer, etc.) 
which work in the same frequency range as this device. It may, therefore, be possible that the 
functionality of this device is limited by or is limiting for other wireless devices. This can only be 
avoided by paying attention to the distance between devices and, where possible, by changing 
the channels of the other devices. 

• 

Be careful when using wireless devices if you have a pacemaker or are dependent on other life-
saving, sensitive electronic equipment, because this product transmits radio signals. 

 

Warranty & copyright 

• 

This device has a two-year product warranty which is valid from the date of purchase. Go to 

www.trust.com/warranty

 for more information. 

• 

It is forbidden to reproduce any part of this instruction manual without the permission of Trust 
International B.V. 

 
 

Summary of Contents for BT220






Reviews: