Easy Scan 19200
6
4. Software installation
All the files required to install the drivers and the application software
are on the CD.
Note:
It is assumed in the examples that your computer uses the
following drive designations: drive ‘C:’ for the hard disk and
drive ‘D:’ for the CD-ROM drive. Replace these if necessary
by the designations used by your system.
4.1 Installing the TWAIN driver
The TWAIN driver is the software that drives the scanner. All the
applications that work with your scanner use this driver. You must,
therefore, install at least the TWAIN driver in order to be able to
operate the scanner.
4.1.1 Windows 3.1x
1.
Restart Windows 3.1x.
2.
Place the CD in your CD-ROM drive.
3.
In ‘Program Manager’ select the ‘Run’ option from the ‘File’
menu. See figure 3.
Figure 3:
Installation under Windows 3.1x
4. Type
[D:\SET-UP.EXE]
in the command line and press
<ENTER>
. See figure 4. After a few seconds the installation
program starts. See figure 6.