Easy Scan 19200
14
5. Working with MGI PhotoSuite SE
5.1 Once-only set-up
Proceed as follows to set up MGI PhotoSuite SE for the scanner:
1.
Start ‘MGI PhotoSuite SE’. A window as in figure 9 appears.
Figure 9:
The location of the ‘Work on your own’
button
2.
Click ‘Work on your own’.
3. Click
‘File’.
4.
Click ‘Get Photos From ->’.
5.
Select ‘Select Source’. See figure 10. A list of available scanners
is displayed.
Figure 10: Setting up the scanner