Easy Scan 19200
2
2. Safety First
Please read the following instructions carefully:
1.
Remove the plugs from the sockets before cleaning the
equipment. Do not use liquid cleaning agents or spray cans.
Wipe off the equipment with a damp cloth.
2.
Do not use this equipment in damp environments such as in
bathrooms, damp cellars or at swimming pools etc.
3.
Make sure there is nothing on the power cable. Do not place the
equipment where the mains cable may be subject to wear and
tear or become damaged.
4.
Never insert objects into the slots on the outside of the equipment
as you can touch live components. This can cause fire or severe
electric shocks.
5.
Never attempt to repair the equipment yourself. If you open or
remove the housing, you may accidentally touch parts carrying a
voltage. You may also face other hazards. This equipment may
only be serviced by specially trained personnel.
6.
Remove the plug from the socket under the following conditions
and have the equipment repaired by specially trained personnel:
a) the cable or the plug has been damaged or worn;
b) liquid has been spilled into the equipment;
c) the equipment has been exposed to rain or water;
d) the equipment is not working normally;
e) the equipment has been dropped and/or the housing is
damaged;
f) the equipment is clearly performing poorly.
7.
Do not place the scanner in direct sunlight. Direct exposure to the
sun or excessive heat can damage the housing.